Page 1 of 1

🔧 NY-MMO Client & Patcher Troubleshooting Guide

Posted: Sat Sep 06, 2025 3:25 am
by Administrator
Image

⚠️ Before Anything Else
  • βœ… MAKE SURE TO OPEN THE opensetup.exe AND PRESS APPLY THEN PRESS OK.
  • βœ… MAKE SURE TO RUN AS ADMIN THE NY-MMO Patcher.exe & NY-MMO.exe


  • πŸ›‘ NY-MMO.exe Won't start (nothing happens after the Gepard Shield load)
    • 1) Open your "NY-MMO folder".
    • 2) Find and run opensetup.exe as Administrator.
    • 3) Go to the Graphics tab.
    • 4) In Graphics Device, select your video card:
      • – NVIDIA or AMD β†’ [Direct3D T&L HAL]
      • – If you don’t have a dedicated GPU, just pick Primary Display Driver [Direct3D T&L HAL].
    • 5) Click Apply, then OK.
    • 6) Restart the client and try launching again.


  • 🌐 Failed to get patch_main.txt
    • There are two possible reasons: the website is currently under maintenance, or your ISP is unable to connect to it.
    • Solution #1: Run NY-MMO.exe directly and ignore patcher for now
    • Solution #2: Restart your internet to renew the IP Address
    • Solution #3: Use VPN to change the IP Address then try to run the patcher


  • πŸ”’ Failed to write settings to registry.
    • Solution: Run as admin the opensetup.exe.


  • πŸ’» For INTEL USERS (If your game crashes after Gepard Shield loads)
    This issue is caused by the latest Intel graphics drivers.
    • βœ… Fix: You need to downgrade your graphics driver to version [31.0.101.4092].
      • 2) Run the installer and complete the installation.
      • 3) Reboot your PC/Laptop after installation.




  • ⌨️ ALT + M (shortcut list) is not saving
    • Solution: Run as admin the NY-MMO.exe

  • πŸ–₯️ Black Screen / Graphic Issues
    • If you encounter the issue shown below (see image), simply open opensetup.exe and enable the option
    • βœ… Disable hardware-accelerated graphics.
    Image